Clean Power Solutions for Your Studio: Understanding Transformers, Power Conditioners, UPS, and More

FREE Soundproofing Workshop: https://www.soundproofyourstudio.com/workshop

When it comes to running a studio, one area that often gets overlooked is power. But clean, reliable power is essential for avoiding ground loops, electrical noise, and keeping your gear safe from surges or voltage fluctuations. In this article, we’re going to break down the various power protection options available for studios and help you understand how to set up a system that keeps your equipment and your sound clean. This topic came up in a recent conversation with a client of mine who was wondering about star grounding, transformers, power conditioners, UPS units, and balanced power systems. Before we break down all your options I want to first mention the importance of wiring your studio correctly to begin with before even considering power conditioners or UPS units. 

Practical Tips for Studio Power Setup

Before choosing the right power equipment, following best practices for studio wiring is crucial for avoiding noise and ground loops. Here are some key tips:

1. Dedicated Circuits for Audio: Wire all audio equipment on its own 15 or 20-amp breaker, depending on power needs. While computers can introduce noise, it’s often best to keep them on the same circuit to avoid ground loops.
2. Separate Circuit for Non-Audio: Lights and non-audio electrical outlets should be on a separate circuit to minimize interference.
3. Panel Management: Try to place the audio circuits on the same leg of your panel if possible, though this can be tricky to balance with other loads.
4. EMI Reduction: Keep electrical and audio lines at least 1 foot apart at all times to reduce the risk of electromagnetic interference (this includes ethernet lines used for audio transmission).

Understanding Your Power Options

Star Grounding: Do You Need It?

Star grounding is a method where all the ground connections for your studio are routed to a single point, or "star." This helps avoid ground loops, which can cause hum and other interference in audio systems. While star grounding is a good practice for reducing noise, it’s not always practical in smaller home studios—especially if you are not wiring your studio from scratch with an electrician involved.

Best Practice Tip: If you're building a studio where you can easily run wiring through the walls and have a talented electrician who understands the concept of star grounding then it is a great solution. However, if you do not want to spend the extra money for star grounding or don't have the ability to rewire your entire studio than star grounding is not a good option. 

There are several ways to protect your studio’s power, each with its own pros and cons. Let’s walk through the most common options.

The SolaHD 23-23-210-8 provides voltage regulation, surge protection, and power conditioning, which helps protect your equipment from unstable power and electrical noise like electromagnetic interference (EMI) or radio-frequency interference (RFI). While it improves overall power quality and can reduce noise, it doesn’t specifically address ground loops unless you’re using an isolation transformer designed for that purpose. This system is great if you are wiring your studio from the ground up because it will protect multiple outlets in different rooms without the need to buy multiple individual power conditioners. 

Recommendation: The SolaHD is great if you want to regulate voltage and protect against surges and noise, but if your primary concern is ground loops, you might need to look into grounding solutions or use an isolation transformer. 

Power conditioners, such as the Furman M-8x2, are a more familiar solution for many studio owners. These units filter the power coming into your gear, smoothing out surges and spikes while also providing noise filtering. While not nearly as robust as the other models on my list, the Furman M-8x2 ensures that your gear receives consistent voltage and power surge protection, which can help protect your home studio gear and provide some cleaning up of the power at the same time. 

Recommendation: If you notice your power fluctuating or you live in an area prone to brownouts or surges, a voltage regulator/power conditioner combo is a great solution. Keep in mind, though, that these protect only what’s plugged into them directly, not the entire room.

The Furman F1500 UPS is a great example of a unit that combines power conditioning with a UPS. A UPS (Uninterruptible Power Supply) ensures that your sensitive gear—like computers, DAWs, and audio interfaces—stay powered during short-term outages, giving you time to save work and shut down safely. This unit also provides surge protection and power conditioning. 

Recommendation: This unit might be one of the best options for home studios where you notice the power going out frequently. For example, my studio has many outages per year. This unit would be a great addition so that I don't lose work or suffer any damages to my gear due to surges when the power comes back on. 

Balanced power systems, like the EquiTech Model 1.5R and the Furman P-2400 AR, offer a high end solution for reducing noise and interference. Balanced power delivers equal voltage on both the hot and neutral wires, which dramatically reduces electrical noise and hum. The EquiTech Model unit can power up to 12 outlets, while the Furman offers 14. These are both high end and expensive units. The EquiTech Model 1.5R costs $2,990 while the Furman P-2400 AR costs $993.43. 

Recommendation: If you want a top of the line solution that gives you peace of mind, these two options are your best bet. Some people swear by balanced power, but you are paying for higher quality gear. These units are geared toward high-end, professional environments where electrical interference and power purity are crucial, such as high-end recording studios, broadcast facilities, or other mission-critical applications requiring the best possible power conditioning. 

Answering My Client's Questions: What Should You Choose?

He was wondering how these various options compare. Here’s what I told him:

• For clean, isolated power, a transformer is the way to go, though it’s usually a bigger investment and best for commercial setups.
• For regulating voltage and conditioning power, the Furman P-2400 AR is excellent. It ensures stable power and clean filtering for critical gear.
• For backup power during outages, the Furman F1500 UPS is a great option to keep your most important gear (like your DAW or computer) safe.
• For comprehensive, clean power that is top of the line, a balanced power system like the EquiTech 1.5R or the Furman P-2400 AR offers the best long-term solutions for high end studios. They will power multiple outlets and significantly reduce noise and interference across your studio.

Final Thoughts: What’s Best for Your Studio?

Every studio has different needs, but in general, asking your electrician about installing a star grounded set up if you are building a new studio is the best option. If you can't do a star grounded system still follow my basic electrical install tips. Then use the SolaHD 23-23-210-8 for extra conditioning and surge protection on your audio circuit. This will be a more cost effective way to ensure protection if you have multiple rooms or multiple outlets that you want to protect. If you do all those things you probably won't need an expensive power conditioner for your studio. I like the term don't fix a problem you don't have. In this case power conditioners may not be needed and are quite costly. 

If you don't have the luxury of wiring your studio then a power conditioner is a great option. Honestly, the Furman 8x2 is a tried and true piece of gear that will work for all home studios. The UPS is great as well, but you don't have to buy a UPS built into your power conditioner, but it is a nice streamlined approach. If you opt for the higher end balanced conditioners they are a great option if you have the budget, but might not be necessary for your average home studio. 

If you're working on designing a studio and want professional help reach out! I’m always happy to help. 

Links to Products:

• Furman M-8x2 (affiliate link)
• Furman P-2400 AR (affiliate link)
• Furman F1500 UPS
• EquiTech 1.5R Balanced Power
• SolaHD Transformer